10 - 120 KVA 3 - phase Low Frequency DSP and Double CPU Uninterrupted Power Supply, UPS GP9330C
Key Features
1. Advanced operation mode
2. DSP control
3. Double CPU control
4. Modularize
5. Battery can be sharing
6. Up to 8 units in parallel
7. Manual maintenance bypass
8. Wide input voltage range
7. High output power factor
9. Strong environmental adaptability
10. Advanced battery management
11. N+X parallel redundancy
12. Compatible with generator
13. Strong shock resistance ability
14. EPO function
15. Full protection against over-discharge, overcharge, over load.
LBS function
· LBS function supports the two independent input to improve the reliability of the system.
High reliability
True on-line static bypass technology, to provide strong overload and fault protection device.
Internal manual maintenance bypass, further improve the reliability of continuous operation of the load.
Network management humanity
Communicate with PC by RS232.
Use SNMP adapter, UPS can realize remote network management function.
Optimized battery performance
Intelligent battery management function (ABM)
Automatically convert to constant-current constant-voltage charging technology.
Parallel Configuration of up to 8 units of Low Frequency Online UPS GP9332C 10-120KVA:
Can parallel 8 units UPS;
Parallel UPS units can share a battery pack;
Non-fixed master/slave parallel
Application:
large-medium computer data center, industrial process and other mission-critical equipment
Technical Specifications of Online UPS GP9332C 10-120KVA
Model
GP9332C 10-120KVA
Rated Power (KVA)
10KVA
15KVA
20KVA
30KVA
40KVA
60KVA
80KVA
100KVA
120KVA
Active Power (KW)
8KW
12KW
16KW
24KW
32KW
48KW
64KW
80KW
90KW
Input
Nominal Voltage
380/400/415VAC 3-phase
Voltage tolerance
400V + 20%/ -25%
Frequency
45 ÷ 65 Hz
Soft Start
0 ÷ 100% in 30’’ (selectable)
Permitted frequency
± 2% (selectable from ± 1% to ± 5%
Standard features
Back Feed protection;
Battery
Type
Lead, flooded and VRLA AGM / GEL; NiCd
AC ripple
< 1%
Temperature compensation
-0.5V × ℃
Typical charging current
0.2 × C10
Output
Number of phase
3 + N
Nominal voltage
380/400/415VAC 3-phase +N
Static stability
± 1%
Dynamic stability
± 5% in 10ms
Voltage distortion
<1% with linear load ;
Crest factor
3:1
Frequency stability
0.05%
Frequency
50 or 60Hz (selectable)
Overload
110% for 60’ ; 125% for 10’; 150% for 1’
Environment
Remote signaling
Voltage-free contacts
Remote commands
EPO and bypass
Communication
Double RS232 + remote contacts +2
Operating Temperature
0 ℃ / + 40 ℃
Relative humidity
< 95% non condensing
Colour
Light grey RAL 7035
Noise
54
60
62
63 ÷ 68
Protection rating
IP20
Efficiency Smart Mode
Up to 98%
Compliance
European Directives: LV 2006/95/CE;
Classification according
(Voltage Frequency Independent)
Physical parameters
Weight (kg)
210
220
230
280
330
450
600
640
650
Dimension
1400 ×
1400 ×
1900 ×
Follow standard of GB/IEC regulation: EMC:GB7260.2/IEC62040-2 GB/17626.2~5/IEC61000-4-2~5 SAFETY:GB4943
Note: Product specifications are subject to change without further notice
Product Tags:
10 - 120 KVA 3 - phase Low Frequency DSP and Double CPU Uninterrupted Power Supply, UPS Images
